Wound Core Type Oil Immersed Distribution - Exporter, Manufacturer & Supplier, Bathinda, India

Wound Core Type Oil Immersed Distribution

To inquire, Select Product/s & Click on

Product Code : 07

[Select]

Product Specification

Wound Core Type Oil Immersed Distribution Transformer
This type of transformer adopts high-permeability cold-rolled Silicon-steel sheets as iron core. It is processed with big fill factor and there is no spacing inside the magnetic path. The HV and LV coils are continuously wound around the core with good concentricity and compact winding. The product is of very low consumption and slight noise pollution by combining new generation of technology, good performance and energy saving. It is widely used in power distribution systems.

Features

The winding iron core is of big fill factor.
The iron core is annealed.
There is only one joint in iron core so that to decrease magnetic resistance and to lower down no-load current by 60~80%.
The no-load capability is decreased by 20~30%.
The magnetic conductance recovers to the original level before it is processed.
The compact structure of core lower down noise pollution by 10dB.

Technical Specification

Capacity (kVA)	Voltage Schedule		Vector Group	Consumption		Short Circuit Impedance (%)	No Load Current (%)	Outline Dimension mm (+-10%)			Weight kg (+-10%)		Gauging Distance (mm)
Capacity (kVA)	HV (kV)	LV (kV)	Vector Group	No Load (W)	Load (W)	Short Circuit Impedance (%)	No Load Current (%)	Length	Width	Height	Oil	Total	Gauging Distance (mm)
30				90	600		0.6	1020	600	1090	95	370	400x550
50				120	870		0.6	1050	620	1120	110	450	400x400
63				140	1040		0.57	1120	650	1150	120	520	550x550
80	6			175	1250		0.54	1160	670	1170	130	570	550x550
100	6.3			200	1500		0.48	1200	700	1210	150	640	550x550
125	11			235	1800		0.45	1250	730	1250	170	750	550x550
160	+-2		Y, d11	280	2200	4	0.39	1290	750	1300	200	860	550x550
200	x 2.5%	0.433	Y, yn0	335	2600		0.36	1330	780	1345	245	990	550x550
250				390	3050		0.33	1370	780	1410	270	1230	660x660
315				465	3650		0.3	1420	800	1470	290	1380	660x660
400				560	4300		0.3	1460	800	1530	320	1760	660x660
500				670	5100		0.27	1505	805	1590	350	1960	660x660
630	5%			840	6200		0.27	1590	850	1650	400	2400	660x660
800				980	7500		0.27	1655	935	1690	550	2530	820x820
1000				1150	10300	4.5	0.27	1755	1035	1750	630	2840	820x820

Note: Dimensions and weights etc. given above are just indicative. We reserve our right for constant improvement / modifications.

Standard Fittings

Conservator
Silicagel Breather
Off Circuit Top Changer
Oil Level Gauge
HV Bushing
LV Bushing
Air Release Plug
Lifting Lugs
Rating & Diagram Plates
Radiators
Base Channel with Rollers
Earthing Terminals
Explosion Vent.

Note: Transformers with other Voltage Ratio, Vector Group, Terminal arrangement can be supplied as per the customers requirement. Fittings like Cable end box, Gas operated relay, MOG, Marshalling box can be provided as per the requirement. Transformers with lower No Load Losses and Load Losses can also be supplied.

Other Products in 'Transformers' category

Amorphous Metal Distribution Transformer	Dry Type (Air Cooled) Transformer with Varnish	Completely Sealed Distribution Transformer	Oil Immersed Power & Distribution Transformer	On Load Tap Changer Power Transformer	Oil Immersed Power & Distribution Transformer

<< Back

Contact Details

5 K.M. Stone, Malout Road, Bathinda - 151002, Punjab, India
Phone:91-164-2270407
Fax:91-164-2237887/2270407

Send Mail

Key Personnel

Mr. Pankaj Agarwal (Director)
Mobile:+919815332387,+919216332387